NSN 5305-00-298-8312 · NIIN 002988312 · FSC 5305
NO DASHES 5305002988312
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD ALL TREATMENT RESPONSES A-S 2416 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 82.0 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.1575 TO 0.1599 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.385 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.291 AND INCHES MAXIMUM 0.412 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| CYAU | SCREW MATERIAL | STEEL COMP 601 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6304 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 140000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CYBA | SCREW SURFACE TREATMENT | NICKEL AND CADMIUM AND CHROMATE |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |