NSN 5305-00-299-7677 · NIIN 002997677 · FSC 5305
NO DASHES 5305002997677
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.501 AND INCHES MAXIMUM 0.587 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.491 AND INCHES MAXIMUM 0.507 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 62000 |
| CYAU | SCREW MATERIAL | ALUMINUM ALLOY 2024 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-430 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6 |
| CYBA | SCREW SURFACE TREATMENT | ANODIZE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.453 AND INCHES MAXIMUM 2.499 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS24694A126 | 80205 |
| MIL-S-7839 | 80205 |
| MIL-S-7839 | 81349 |
| AN509DD416-39 | 88044 |
| MS24694A126 | 96906 |
Supersedes
This item replaces cancelled NIIN 009450544. An older drawing citing one of those numbers resolves here.