NSN 5305-00-310-6416 · NIIN 003106416 · FSC 5305
NO DASHES 5305003106416
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S5967 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.631 AND INCHES MAXIMUM 0.681 |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.662 AND INCHES MAXIMUM 0.668 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.43654 AND INCHES MAXIMUM 0.4370 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.391 AND INCHES MAXIMUM 1.421 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11909V7L12-1 | 59563 |
| HT4028L7-12 | 73197 |
| ST3M466V7L12-1 | 76301 |
| HT4028L7-12 | 80539 |
| HT4028L7-12 | 92215 |
| HT4028L7-12 | 97928 |
| HT4028L7-12 | L4528 |
| ST3M466V7L12-1 | K5673 |
| ST3M466V7L12-1 | 007R1 |
| HT4028L7-12 | 06950 |
| ST3M466V7L12-1 | 0PTK6 |
| HT4028L7-12 | 17446 |