NSN 5305-00-316-7343 · NIIN 003167343 · FSC 5305
NO DASHES 5305003167343
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.431 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.703 AND INCHES MAXIMUM 0.733 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,FSC- 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.385 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
26 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M454-3L5 | 1VSL7 |
| HT4025L3-5 | 27624 |
| HT4025L3-5 | 56878 |
| 11905-3L5 | 59563 |
| ST3M454-3L-5 | 58998 |
| WC4025L-3-5 | 60516 |
| HT4025L3-5 | 73197 |
| ST3M454-3L5 | 76301 |
| HT4025L3-5 | 80539 |
| CHT4025-3-5 | 80539 |
| CHT4025-3-5 | 92215 |
| HT4025L3-5 | 92215 |
| HT4025L3-5 | 97928 |
| 10125161 | A486G |
| HT4025L3-5 | C4293 |
| HT4025L3-5 | R1120 |
| HT4025L3-5 | K5673 |
| HT4025L3-5 | L4528 |
| ST3M454-3L5 | 007R1 |
| HT4025L3-5 | 06725 |
| HT4025L3-5 | 06950 |
| ST3M454-3L5 | 06710 |
| HT4025L3-5 | 0PTK6 |
| ST3M454-3L5 | 0ZC92 |
| HT4025L3-5 | 17446 |
| CHT4025-3-5 | 17419 |