NSN 5305-00-316-8104 · NIIN 003168104 · FSC 5305
NO DASHES 5305003168104
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.444 AND INCHES MAXIMUM 0.494 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.766 AND INCHES MAXIMUM 1.796 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.302 AND INCHES MAXIMUM 1.322 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.389 AND INCHES MAXIMUM 0.394 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.074 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4024L4-21 | 50392 |
| HT4024L4-21 | 56878 |
| 11907-4L21-1 | 59563 |
| ST3M455-4L21-1 | 58998 |
| HT4024L4-21 | 73197 |
| ST3M455-4L21-1 | 76301 |
| HT4024L4-21 | 80539 |
| ST3M455-4L21-1 | 92215 |
| HT4024L4-21 | 92215 |
| HT4024L4-21 | 97928 |
| ST3M455-4L21-1 | K5676 |
| HT4024L4-21 | L4528 |
| HT4024L4-21 | 06950 |
| HT4024L4-21 | 17446 |