NSN 5305-00-324-9284 · NIIN 003249284 · FSC 5305
NO DASHES 5305003249284
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.2865 AND INCHES MAXIMUM 2.885 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| ABQZ | INTERNAL DRIVE STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 FSC- 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| MATT | MATERIAL | OVERALL STEEL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.444 AND INCHES MAXIMUM 0.494 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.329 AND INCHES MAXIMUM 3.359 |
| AASK | HEAD STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.208 AND INCHES MAXIMUM 3.248 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HT4025L4D46 | 50392 |
| HT4025L4D46 | 56878 |
| ST3M454-4DL46 | 58998 |
| WC4025L-4D46 | 60516 |
| 11905-4DL46 | 59563 |
| HT4025L4D46 | 73197 |
| ST3M454-4DL46 | 76301 |
| ST3M454-4LD46 | 80539 |
| HT4025L4D46 | 92215 |
| HT4025L4D46 | 97928 |
| HT4025L4D46 | L4528 |
| HT4025L4D46 | 06950 |
| HT4025L4D46 | 17446 |