NSN 5305-00-399-0212 · NIIN 003990212 · FSC 5305
NO DASHES 5305003990212
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.616 AND INCHES MAXIMUM 0.666 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.251 AND INCHES MAXIMUM 1.281 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.564 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11907-6L10 | 59563 |
| HT4024L6-10 | 60516 |
| HT4024L6-10 | 58998 |
| HT291-6-10 | 73197 |
| HT4024L6-10 | 73197 |
| ST3M455-6L10 | 76301 |
| HT4024L6-10 | 80539 |
| HT4024L6-10 | 92215 |
| HT4024L6-10 | 97928 |
| HT4024L6-10 | C4293 |
| 10125274 | A486G |
| HT4024L6-10 | K5673 |
| HT4024L6-10 | L4528 |
| HT4024L6-10 | 06950 |
| HT4024L6-10 | 0PTK6 |
| HT4024L6-10 | 17446 |
Supersedes
This item replaces cancelled NIIN 003249089. An older drawing citing one of those numbers resolves here.