NSN 5305-00-407-5479 · NIIN 004075479 · FSC 5305
NO DASHES 5305004075479
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| ABQZ | INTERNAL DRIVE STYLE | |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.111 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.036 |
| BQDM | HOLE TYPE | DRILLED |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.125 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-S-5002 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.226 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.134 AND INCHES MAXIMUM 0.138 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD ALL MATERIAL RESPONSES 66 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ASXK | HOLE QUANTITY | 2 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 004983423. An older drawing citing one of those numbers resolves here.