NSN 5305-00-411-0681 · NIIN 004110681 · FSC 5305
NO DASHES 5305004110681
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-763,300 SERIES OR FED STD 1ST MATERIAL RESPONSE 66,300 SERIES OR ASSN STD 2ND MATERIAL RESPONSE CO- 16-18 OR 18-8 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING OR STEEL |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.531 AND INCHES MAXIMUM 0.562 |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.562 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.062 |
| ABQZ | INTERNAL DRIVE STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.167 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 9C |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS51957-141 | 80205 |
| FFS92 | 81348 |
| 7903132-07 | 90536 |
| 433913-43 | 96214 |
| MS51957-141 | 96906 |
| 10125282 | A486G |
| MS51597-141 | D9182 |
| JVA83 | 02750 |
| 7903132-07 | 03956 |
| 70A3210218-480 | 04655 |
| 0919-141 | 07187 |
Supersedes
This item replaces cancelled NIIN 010574240. An older drawing citing one of those numbers resolves here.