NSN 5305-00-411-0683 · NIIN 004110683 · FSC 5305
NO DASHES 5305004110683
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.087 AND INCHES MAXIMUM 0.097 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.256 AND INCHES MAXIMUM 0.270 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.531 AND INCHES MAXIMUM 0.562 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.562 |
| AAJD | THREAD CLASS | 2A |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-763,300 SERIES OR FED STD 1ST MATERIAL RESPONSE 66,300 SERIES OR ASSN STD 2ND MATERIAL RESPONSE CO- 16-18 OR 18-8 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING OR STEEL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 9C |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 245202 | 35679 |
| 639122-350 | 57057 |
| 10SRSST | 70318 |
| FFS92 | 81348 |
| AN515C6-9 | 88044 |
| 290-12-0041 | 95542 |
| MS51957-123 | 96906 |
| 290-12-0041 | C1834 |
| 71C0272H11 | 09062 |
| 71D0650H19 | 09062 |
Supersedes
This item replaces cancelled NIINs 000914966 · 000927264 · 010109709 · 010109708. An older drawing citing one of those numbers resolves here.