NSN 5305-00-422-1655 · NIIN 004221655 · FSC 5305
NO DASHES 5305004221655
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ABQZ | INTERNAL DRIVE STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE -AC .S.13545,FSC- 76301 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.371 AND INCHES MAXIMUM 0.438 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.006 AND INCHES MAXIMUM 1.053 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3M263-4-10 | 56878 |
| 66117H4-10 | 56878 |
| HT195-4-10 | 73197 |
| 3M263-4-10 | 76301 |
| 66117H4-10 | 80539 |
| 3M263-4-10 | 92215 |
| HS2623-4Z10 | 97928 |
| HT195-4-10 | C4293 |
| HT195-4-10 | L4528 |
| HT195-4-10 | R1120 |
| HS2623-4Z10 | 17446 |