NSN 5305-00-447-3787 · NIIN 004473787 · FSC 5305
NO DASHES 5305004473787
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.429 AND INCHES MAXIMUM 0.477 |
| ABQZ | INTERNAL DRIVE STYLE | |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.506 AND INCHES MAXIMUM 0.556 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.204 AND INCHES MAXIMUM 1.234 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
Cross-references
24 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| WC4024L5-11 | 60516 |
| 11907-5L11 | 59563 |
| ST3M455L5-11 | 58898 |
| ST3M455-5L11-1 | 58998 |
| HT4024L5-11-1 | 60516 |
| 11907-5L11-1 | 59563 |
| HT4024L5-11-1 | 73197 |
| HT4024L5-11 | 73197 |
| ST3M455-5L11-1 | 76301 |
| ST3M455-5L11 | 76301 |
| HT4024L5-11-1 | 80539 |
| HT4024L5-11 | 80539 |
| HT4024L5-11-1 | 92215 |
| HT4024L5-11 | 92215 |
| HT4024L5-11-1 | 97928 |
| HT4024L5-11 | 97928 |
| HT4024L5-11 | C4293 |
| 10125299 | A486G |
| HT4024L5-11-1 | R1120 |
| HT4024L5-11-1 | K5673 |
| HT4024L5-11-1 | L4528 |
| HT4024L5-11-1 | 06950 |
| HT4024L5-11-1 | 0PTK6 |
| HT4024L5-11-1 | 17446 |