NSN 5305-00-455-2507 · NIIN 004552507 · FSC 5305
NO DASHES 5305004552507
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.147 AND INCHES MAXIMUM 0.172 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
| AASK | HEAD STYLE | |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY FINISH |
| ABQZ | INTERNAL DRIVE STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.132 AND INCHES MAXIMUM 0.199 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING OR STEEL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 2C |
| CYBA | SCREW SURFACE TREATMENT | OXIDE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-13924,CL 4 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-763,300 SERIES OR FED STD 1ST MATERIAL RESPONSE 66,300 SERIES OR ASSN STD 2ND MATERIAL RESPONSE CO- 16-18 OR 18-8 |
| AAJD | THREAD CLASS | 2A |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 00133692N | 3686A |
| MS51959-3B | 36126 |
| F9-2-4LG | 72314 |
| MS51959-3B | 80205 |
| FFS92 | 81348 |
| 222391-003 | 81413 |
| 418331-3 | 96214 |
| 514-90037-005 | 96182 |
| MS51959-3B | 96906 |
| 10125306 | A486G |
| HA1764A00 | F6371 |
| 141700213 | D1876 |
| 141700213 | D9444 |
| 31138800005 | SD454 |
| 1786858 | 10001 |