NSN 5305-00-474-0485 · NIIN 004740485 · FSC 5305
NO DASHES 5305004740485
In Stock
SETSCREW
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.250 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| ABQJ | POINT STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.219 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.565 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.070 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.094 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.406 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.406 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6324 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE AN--61 |