NSN 5305-00-474-3506 · NIIN 004743506 · FSC 5305
NO DASHES 5305004743506
In Stock
SETSCREW
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.266 AND INCHES MAXIMUM 0.296 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.502 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.223 AND INCHES MAXIMUM 0.225 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.294 AND INCHES MAXIMUM 0.384 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 30.0 |
| MATT | MATERIAL | OVERALL STEEL |
| ABQJ | POINT STYLE | |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.280 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |