NSN 5305-00-474-9821 · NIIN 004749821 · FSC 5305
NO DASHES 5305004749821
In Stock
SETSCREW
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRHC | HOLE CONFIGURATION STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-637 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 1212 |
| AAJD | THREAD CLASS | 1A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MAXIMUM 1.700 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.700 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.350 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.310 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 15-N MINIMUM 80.0 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.160 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GAAN150901 | 23040 |
| GAAN150901 | 57526 |
| E446 | 76446 |
| 50901 | 02978 |