NSN 5305-00-488-4363 · NIIN 004884363 · FSC 5305
NO DASHES 5305004884363
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.078 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.063 AND INCHES MAXIMUM 0.073 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.040 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.262 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.530 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.880 |
| AASK | HEAD STYLE | |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| MATT | MATERIAL | OVERALL STEEL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.825 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 67487 | 93835 |