NSN 5305-00-505-2935 · NIIN 005052935 · FSC 5305
NO DASHES 5305005052935
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| CYAU | SCREW MATERIAL | TITANIUM ALLOY UNS R54520 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE NAS621,CO- 6AL-4V |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.322 AND INCHES MAXIMUM 0.385 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.139 AND INCHES MAXIMUM 0.232 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.312 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LS15264V3-5 | 27624 |
| LS15264V3-5 | 56878 |
| LS15264V3-5 | 80539 |
| LS15264V3-5 | 92215 |
| LS15264V3-5 | 97928 |
| LS15262V3-5 | 98897 |
| LS15264V3-5 | 98897 |
| LS15264V3-5 | 06950 |
| LS15264V3-5 | 06725 |
| LS15264V3-5 | 06710 |
| LS15264V3-5 | 17446 |