NSN 5305-00-505-2994 · NIIN 005052994 · FSC 5305
NO DASHES 5305005052994
In Stock
SCREW,MACHINE
Screws
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYAU | SCREW MATERIAL | TITANIUM ALLOY UNS R54520 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.577 AND INCHES MAXIMUM 0.670 |
| AASK | HEAD STYLE | |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE NAS621,CO- 6AL-4V |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.322 AND INCHES MAXIMUM 0.385 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.750 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LS15264V3-12 | 1UX99 |
| LS15264V3-12 | 56878 |
| AN515-6-8 | 77445 |
| LS15264V3-12 | 92215 |
| LS15264V3-12 | 93907 |
| LS15264V3-12 | 98897 |
| LS15264V3-12 | 06950 |
| LS15264V3-12 | 06725 |
| LS15264V3-12 | 06710 |
| LS15264V3-12 | 17446 |