NSN 5305-00-505-3110 · NIIN 005053110 · FSC 5305
NO DASHES 5305005053110
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.365 AND INCHES MAXIMUM 1.385 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.133 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.301 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.636 AND INCHES MAXIMUM 1.666 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.373 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R54520 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621,CO- 6AL-4V |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LS15265V3-22 | 27624 |
| LS15265V3-22 | 56878 |
| AN515C-10-16 | 77445 |
| LS15265V3-22 | 92215 |
| LS15265V3-22 | 98897 |
| LS15265V3-22 | 06725 |
| LS15265V3-22 | 06710 |
| LS15265V3-22 | 06950 |