NSN 5305-00-512-5087 · NIIN 005125087 · FSC 5305
NO DASHES 5305005125087
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| CYAU | SCREW MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6049 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.750 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.593 AND INCHES MAXIMUM 3.687 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.313 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.103 AND INCHES MAXIMUM 0.118 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AN520-10-8 | 77445 |
| 5305PL0809099 | 9009H |
| LS15263-3-59 | 98897 |