NSN 5305-00-519-7831 · NIIN 005197831 · FSC 5305
NO DASHES 5305005197831
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.506 AND INCHES MAXIMUM 0.556 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.858 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.474 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3125 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST3M466V5L5-1 | 27624 |
| ST3M466V5L5-1 | 56878 |
| ST3M466V5L5-1 | 60516 |
| 11909V5L5-1 | 59563 |
| ST3M466V5L5-1 | 58998 |
| HT4028L5-5 | 73197 |
| ST3M466V5L5-1 | 76301 |
| HT4028L5-5 | 80539 |
| HT4028L5-5 | 92215 |
| ST3M466V5L5-1 | 92215 |
| HT4028L5-5 | 97928 |
| HT4028L5-5 | L4528 |
| ST3M466V5L5-1 | K5673 |
| HT4028L5-5 | 06950 |
| HT4028L5-5 | 17446 |