NSN 5305-00-550-1519 · NIIN 005501519 · FSC 5305
NO DASHES 5305005501519
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6050 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6300 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, MACHINE, 100 DEG. FLAT HEAD, FULL THREADED, ALLOY STEEL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.375 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.375 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.233 AND INCHES MAXIMUM 0.279 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 3 |
| AAJD | THREAD CLASS | 3A |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS514P632-6 | 80205 |
| MILS7839 | 80205 |
| MILS7839 | 81349 |
| 1029421-6-6 | 88277 |
| 947546-2106 | 06481 |
| 1029421-6-6 | 18355 |
Supersedes
This item replaces cancelled NIINs 004758400 · 007938795. An older drawing citing one of those numbers resolves here.