NSN 5305-00-580-7224 · NIIN 005807224 · FSC 5305
NO DASHES 5305005807224
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.301 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.573 AND INCHES MAXIMUM 0.603 |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.103 AND INCHES MAXIMUM 0.118 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.034 AND INCHES MAXIMUM 0.042 |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1123 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.313 |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1123-5H | 30485 |
| NAS1123-5H | 30902 |
| NAS1123-5H | 50568 |
| NAS1123-5H | 53606 |
| NAS1123-5H | 56878 |
| NAS1123-5H | 58998 |
| NAS1123-5H | 73197 |
| NAS1123-5H | 80205 |
| NAS1123-5H | 80539 |
| NAS1123-5H | 92215 |
| NAS1123-5H | 97928 |
| NAS1123-5H | L4528 |
| NAS1123-5H | 04348 |
| NAS1123-5H | 07851 |
| NAS1123-5H | 08938 |
| NAS1123-5H | 17446 |
Supersedes
This item replaces cancelled NIIN 001448442. An older drawing citing one of those numbers resolves here.