NSN 5305-00-584-5338 · NIIN 005845338 · FSC 5305
NO DASHES 5305005845338
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUK | SPLINE WIDTH | INCHES MINIMUM 0.013 AND INCHES MAXIMUM 0.014 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.112 AND INCHES MAXIMUM 0.118 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CMLP | THREAD QUANTITY PER INCH | 72 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.172 AND INCHES MAXIMUM 0.204 |
| AASK | HEAD STYLE | |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.061 AND INCHES MAXIMUM 0.062 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD ALL MATERIAL RESPONSES 66 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.144 AND INCHES MAXIMUM 0.204 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.073 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.051 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.073 |