NSN 5305-00-637-5131 · NIIN 006375131 · FSC 5305
NO DASHES 5305006375131
In Stock
SETSCREW
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AAJD | THREAD CLASS | 1A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.385 AND INCHES MAXIMUM 0.395 |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.160 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5732 |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.210 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 120.0 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.146 AND INCHES MAXIMUM 0.166 |
| FEAT | SPECIAL FEATURES | 2 HOLES 0.047 IN. TO 0.053 IN. DIA 90 DEGREES A PART DRILLED APPROX. 0.190 IN. FROM END OF POINT |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.535 AND INCHES MAXIMUM 0.555 |