NSN 5305-00-637-7049 · NIIN 006377049 · FSC 5305
NO DASHES 5305006377049
In Stock
SCREW,MACHINE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.350 |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASXK | HOLE QUANTITY | 1 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.389 AND INCHES MAXIMUM 0.414 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.812 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6050 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6300 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.875 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.161 AND INCHES MAXIMUM 0.170 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 321716 | 66503 |