NSN 5305-00-637-8033 · NIIN 006378033 · FSC 5305
NO DASHES 5305006378033
In Stock
SCREW,MACHINE
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ASXK | HOLE QUANTITY | 1 |
| CYAU | SCREW MATERIAL | STEEL COMP 8740 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.389 AND INCHES MAXIMUM 0.414 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.200 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 0.500 |
| FEAT | SPECIAL FEATURES | MAGNETICALLY INSPECTED TO AMS 2640 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 19.0 AND ROCKWELL C MAXIMUM 26.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.750 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.750 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.047 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.042 AND INCHES MAXIMUM 0.052 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006708534. An older drawing citing one of those numbers resolves here.