NSN 5305-00-696-5148 · NIIN 006965148 · FSC 5305
NO DASHES 5305006965148
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.272 AND INCHES MAXIMUM 0.291 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 120000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 8 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.612 AND INCHES MAXIMUM 0.625 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| ASXK | HOLE QUANTITY | 6 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY HEAD HEIGHT |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MAXIMUM 1.250 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.250 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 2,CL 3 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| BQDM | HOLE TYPE | DRILLED |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 215023 | 19207 |