NSN 5305-00-704-0681 · NIIN 007040681 · FSC 5305
NO DASHES 5305007040681
In Stock
SETSCREW
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.113 AND INCHES MAXIMUM 0.116 |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.070 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.041 AND INCHES MAXIMUM 0.046 |
| ABQJ | POINT STYLE | |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.165 AND INCHES MAXIMUM 0.170 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 360 OR COPPER ALLOY 377 |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.1262 TO 0.1279 |
| CMLP | THREAD QUANTITY PER INCH | 64 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.239 |
| FEAT | SPECIAL FEATURES | DRILLED HOLE 0.0595 IN. DIA THRU LONGITUDAL AXIS |
| ABQZ | INTERNAL DRIVE STYLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 716-22 | 89944 |
Supersedes
This item replaces cancelled NIIN 003033276. An older drawing citing one of those numbers resolves here.