NSN 5305-00-715-2048 · NIIN 007152048 · FSC 5305
NO DASHES 5305007152048
In Stock
SCREW,MACHINE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.385 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.875 |
| AASK | HEAD STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| FEAT | SPECIAL FEATURES | MATERIAL,ST1016,ST1017,ST1018,ST1019,ST1020,ST1022,ST1137 DOC. AND CLASS. FED STD 66,ST0015,FED STD 66,B1122,ST0016,FED STD 66,B1123 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 3C |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-634 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-634 OR FED SPEC 3RD MATERIAL RESPONSE QQ-S-634 OR FED SPEC 4TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 5TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 6TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 7TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 8TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 9TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 10TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 11TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 12TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 13TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 14TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 15TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 16TH MATERIAL RESPONSE QQ-S-634 OR FED SPEC 17TH MATERIAL RESPONSE QQ-S-637 OR FED STD 18TH MATERIAL RESPONSE 66 OR FED STD 19TH MATERIAL RESPONSE 66 OR FED STD 20TH MATERIAL RESPONSE 66 OR FED STD 21ST MATERIAL RESPONSE 66 OR FED STD 22ND MATERIAL RESPONSE 66 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.875 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 OR STEEL OR STEEL COMP 1011 OR STEEL COMP 1013 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7S5-10-14 | 43999 |
| 1087510-10-14 | 88277 |
| AN507-1032R14 | 88044 |
| S1087510-10-14 | 88277 |
| 1087510-10-14 | 18355 |
| S1087510-10-14 | 18355 |
Supersedes
This item replaces cancelled NIIN 001510251. An older drawing citing one of those numbers resolves here.