NSN 5305-00-719-5003 · NIIN 007195003 · FSC 5305
NO DASHES 5305007195003
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.250 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.452 AND INCHES MAXIMUM 0.507 |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.150 AND INCHES MAXIMUM 1.250 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 22312ADX | 1VN02 |
| 6931056ITEM 19 | 53711 |
| 22312 | 73734 |
| MS51959-84 | 80205 |
| 5305PL0799716 | 9009H |
| MS51959-84 | 96906 |
| MS35249-91 | D9182 |
Supersedes
This item replaces cancelled NIINs 014761115 · 000597248 · 000426828 · 005793897 · 009950577 · 010575515. An older drawing citing one of those numbers resolves here.