NSN 5305-00-719-5007 · NIIN 007195007 · FSC 5305
NO DASHES 5305007195007
In Stock
SCREW,MACHINE
Screws
Application: MRAP - M-ATV; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| AAJD | THREAD CLASS | 2A |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.452 AND INCHES MAXIMUM 0.507 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | MRAP - M-ATV; ARMORED MULTI-PURPOSE VEHICLE (AMPV) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.900 AND INCHES MAXIMUM 1.000 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.000 |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AASK | HEAD STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 0844V099 | 27315 |
| 608-7120913 ITEM 51 | 53711 |
| 23310 | 73734 |
| MS51959-83 | 80205 |
| MS51959-83 | 96906 |
| 0.250-20UNC-2AX 1.000LG | D9182 |
| AESC1C250A00SH8A31 | 05047 |
| 5000 416607 | 04801 |
| AESC250A00SH8A31 | 05047 |
Supersedes
This item replaces cancelled NIINs 001683086 · 005828515 · 005793896 · 008166821 · 008011389. An older drawing citing one of those numbers resolves here.