NSN 5305-00-719-5404 · NIIN 007195404 · FSC 5305
NO DASHES 5305007195404
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6050 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6300 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.516 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.875 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.327 AND INCHES MAXIMUM 0.385 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS24694S55 | 7Y270 |
| MS24694S55 | 80205 |
| AN509-10R13 | 81352 |
| 5305PL0860324 | 9009H |
| MS24694S55 | 96906 |
| MS24694-S55 | D9182 |
| MS24694S55 | 9M264 |
| 04051438970232 | D4199 |
| Z00.N5150624055 | F0086 |
| 2008137 | S4956 |
| 2008137 | 001JK |
| MS24694-S55 | 001JK |
| MS24694S55 | 0LPR3 |
Supersedes
This item replaces cancelled NIINs 000821898 · 002988396. An older drawing citing one of those numbers resolves here.