NSN 5305-00-725-4111 · NIIN 007254111 · FSC 5305
NO DASHES 5305007254111
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.403 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.688 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.250 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| MATT | MATERIAL | OVERALL STEEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.922 AND INCHES MAXIMUM 0.938 |
| AAJD | THREAD CLASS | 2A |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 85000 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 429730 | 21450 |
| MS90726-165 | 80205 |
| FFS85 | 81348 |
| MS90726-165 | 96906 |
| 251462 | H0001 |
Supersedes
This item replaces cancelled NIINs 000181485 · 000428732 · 000428734 · 000826669 · 002269078 · 005273317 · 006162763 · 006853197 · 006965074. An older drawing citing one of those numbers resolves here.