NSN 5305-00-725-4114 · NIIN 007254114 · FSC 5305
NO DASHES 5305007254114
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.688 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 2A |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.403 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.922 AND INCHES MAXIMUM 0.938 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 85000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.500 |
| MATT | MATERIAL | OVERALL STEEL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 32.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 271750 | 31007 |
| 25338R1 | 45RP7 |
| MS90726-166 | 80205 |
| FFS85 | 81348 |
| AN60-10-24 | 87823 |
| 271750 | 92679 |
| 70008-166 | 95097 |
| MS90726-166 | 96906 |
| 0271750 | H0001 |
| 271750 | H0001 |
| 251463 | H0001 |
Supersedes
This item replaces cancelled NIINs 002061659 · 002269079 · 002688591 · 007534086 · 009596266. An older drawing citing one of those numbers resolves here.