NSN 5305-00-725-4191 · NIIN 007254191 · FSC 5305
NO DASHES 5305007254191
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.464 AND INCHES MAXIMUM 0.500 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.500 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.147 AND INCHES MAXIMUM 0.172 |
Cross-references
19 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 22206ADX | 1VN02 |
| 245021 | 35679 |
| 22206 | 73734 |
| FFS92 | 81348 |
| 048303-007 | 89305 |
| LIQ505C2-8 | 89305 |
| 5305PL0144681 | 9009H |
| MS51959-7 | 96906 |
| 342-0137-000 | D9182 |
| 418198-7 | D9182 |
| 418331-7 | D9182 |
| MS51959-07 | D9182 |
| 2 0041-668 | AC90N |
| MS35249-14 | D9182 |
| AN505C2-8 | D9182 |
| 2 0041-668 | S3465 |
| A08640 | K0967 |
| 40524002916 | S0522 |
| Y3&2&W | 00141 |
Supersedes
This item replaces cancelled NIINs 002823831 · 007054839 · 010503824. An older drawing citing one of those numbers resolves here.