NSN 5305-00-726-2572 · NIIN 007262572 · FSC 5305
NO DASHES 5305007262572
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL |
| AASB | FASTENER LENGTH | INCHES MINIMUM 5.906 AND INCHES MAXIMUM 6.000 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.922 AND INCHES MAXIMUM 0.937 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.403 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.688 |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE AST- B633 TY 2 SC 3 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 8 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC AND CHROMATE |
| AAJD | THREAD CLASS | 2A |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 18C1096 | 77237 |
| MS90726-178 | 80205 |
| B1821BH063F600N | 80204 |
| FFS85 | 81348 |
| 13207E7400-2FN34 | 97403 |
| MS90726-178 | 96906 |
| MS90727-178 | 96906 |
| 5305007254171 | A00AM |
| AES01F625F00AW9A91 | 05047 |
| ASEM B18.2.1 | 05047 |
| 18C1096 | 12603 |
Supersedes
This item replaces cancelled NIIN 007254171. An older drawing citing one of those numbers resolves here.