NSN 5305-00-765-4252 · NIIN 007654252 · FSC 5305
NO DASHES 5305007654252
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| AAJD | THREAD CLASS | 2A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.312 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.312 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.292 AND INCHES MAXIMUM 0.332 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD ALL MATERIAL RESPONSES 66 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| ABQZ | INTERNAL DRIVE STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 22263ADX | 1VN02 |
| 8929207-7 | 49671 |
| 22263 | 73734 |
| MS51959-42 | 80205 |
| FF-S-92TYPE3STYLE2C | 81348 |
| MS51959-42 | 96906 |
| AN505C8-5 | D9182 |
| 853009 | D9182 |
| MS35249-49 | D9182 |
| MS51959-41 | D9182 |
| 852888 | D9182 |
Supersedes
This item replaces cancelled NIINs 000804731 · 002763231 · 002742083 · 010452444. An older drawing citing one of those numbers resolves here.