SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305007665306
Availability: LimitedAvailability

Screws

Technical characteristics

22 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.250
ANEE	GRIP LENGTH	INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698
ABQZ	INTERNAL DRIVE STYLE
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495
AAWB	SHANK UNTHREADED HOLE DIAMETER	FIRST HOLE INCHES NOMINAL 0.076
AASB	FASTENER LENGTH	INCHES MINIMUM 0.978 AND INCHES MAXIMUM 0.983
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.395
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES MINIMUM 0.316
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 180000
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.5 AND DEGREES MAXIMUM 100.5
SFTT	SURFACE TREATMENT	OVERALL CADMIUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	FIRST HOLE INCHES MINIMUM 0.862 AND INCHES MAXIMUM 0.867
CSYM	SURFACE FINISH	GRIP MICROINCHES 32.0
MATT	MATERIAL	OVERALL STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049
CQFM	HARDNESS RATING	OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0
CMLP	THREAD QUANTITY PER INCH	28

11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.