NSN 5305-00-786-4030 · NIIN 007864030 · FSC 5305
NO DASHES 5305007864030
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 120000 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.070 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.625 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.625 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.226 AND INCHES MAXIMUM 0.243 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.551 AND INCHES MAXIMUM 0.562 |
| FEAT | SPECIAL FEATURES | 0.030 IN. MIN 0.040 IN.MAX BY 45 DEG CHAMFER ON THD END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 8 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY HEAD HOLE CONFIGURATION AND SPECIAL FEATURES |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007883732. An older drawing citing one of those numbers resolves here.