NSN 5305-00-804-1293 · NIIN 008041293 · FSC 5305
NO DASHES 5305008041293
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP 601 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6304 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ABQZ | INTERNAL DRIVE STYLE | |
| CRHC | HOLE CONFIGURATION STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 142000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.050 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.390 AND INCHES MAXIMUM 1.410 |
| AASK | HEAD STYLE | |
| BQDM | HOLE TYPE | DRILLED |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.3420 TO 0.3449 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.315 |
| ASXK | HOLE QUANTITY | 6 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.380 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |