NSN 5305-00-808-7832 · NIIN 008087832 · FSC 5305
NO DASHES 5305008087832
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.472 AND INCHES MAXIMUM 0.565 |
| AASK | HEAD STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 3C |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.238 AND INCHES MAXIMUM 0.279 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJD | THREAD CLASS | 2A |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10236-0310-0001 | 60678 |
| MS24693-S29 | 80205 |
| FF-S-92 | 81348 |
| S1093732F8 | 88277 |
| 5305PL0142345 | 9009H |
| MS24693-S29 | 96906 |
| AN507-632R10 | D9182 |
| MS24693S29 | D9182 |
| MS24693-S29 | A0126 |
| MS24693-29 | D9182 |
Supersedes
This item replaces cancelled NIINs 002972863 · 010063742. An older drawing citing one of those numbers resolves here.