NSN 5305-00-815-6117 · NIIN 008156117 · FSC 5305
NO DASHES 5305008156117
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR CADMIUM OR CHROMATE |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.329 AND INCHES MAXIMUM 0.385 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.070 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416 TY 1 OR FED SPEC 2ND TREATMENT RESPONSE QQ--416 TY 2 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 OR STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 6150 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.276 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.010 AND INCHES MAXIMUM 1.057 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.909 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 51B333-12H | 27264 |
| 51B333-12H | 27624 |
| 51B333-12H | 73197 |
| 51B333-12H | 76823 |
| 51B333-12H | 92215 |
| 51B333-12H | L4528 |
| 51B333-12H | 06950 |
| 51B333-12H | 06725 |
| 51B333-12H | 0JRC1 |
| 51B333-12H | 17446 |