NSN 5305-00-824-8576 · NIIN 008248576 · FSC 5305
NO DASHES 5305008248576
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1204 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.449 AND INCHES MAXIMUM 0.507 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.291 AND INCHES MAXIMUM 0.341 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.239 AND INCHES MAXIMUM 1.269 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-8503 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 5TH MATERIAL RESPONSE -IL-S-6049 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.923 AND INCHES MAXIMUM 0.953 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.113 AND INCHES MAXIMUM 1.163 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1204-15D | 30902 |
| NAS1204-15D | 30889 |
| NAS1204-15D | 50568 |
| NAS1204-15D | 56878 |
| NAS1204-15D | 71563 |
| NAS1204-15D | 73197 |
| NAS1204-15D | 80205 |
| NAS1204-15D | 80539 |
| NAS1204-15D | 82172 |
| 5305PL1024830 | 9009H |
| NAS1204-15D | C4293 |
| NAS1204-15D | 04348 |
| NAS1204-15D | 08938 |
| NAS1204-15D | 07851 |