NSN 5305-00-827-5270 · NIIN 008275270 · FSC 5305
NO DASHES 5305008275270
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 1010 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.563 AND INCHES MAXIMUM 0.625 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.279 |
| AAJD | THREAD CLASS | 2A |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY INTERNAL DRIVE STYLE; INTERNAL DRIVE LOCATION AND SURFACE TREATMENT; AND SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 2ND MATERIAL RESPONSE QQ-S-630 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-631 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-634 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.625 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 23AN507-632R10 | 80045 |
| AN507-632R10 | 88044 |
| MS24693-29 | 96906 |