NSN 5305-00-829-1419 · NIIN 008291419 · FSC 5305
NO DASHES 5305008291419
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.700 AND INCHES MAXIMUM 0.750 |
| AAJD | THREAD CLASS | 2A |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.191 AND INCHES MAXIMUM 0.225 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-630 OR FED SPEC 1ST MATERIAL RESPONSE QQ-S-631 OR FED SPEC 1ST MATERIAL RESPONSE QQ-S-634 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.750 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 103665 | 65597 |
| 211-0086-00 | 80009 |
| MS24693-S8 | 96906 |
| MS24693-S-8 | D9182 |
| 10114600 | A486G |
| C10236-0112-0001 | U8539 |
Supersedes
This item replaces cancelled NIINs 001512074 · 002221816. An older drawing citing one of those numbers resolves here.