NSN 5305-00-833-7228 · NIIN 008337228 · FSC 5305
NO DASHES 5305008337228
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| AAJD | THREAD CLASS | 2A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.172 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.312 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.312 |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS662C2R5 | 80205 |
| FF-S-92 | 81348 |
| 5305PL0735739 | 9009H |
| 15650326-7 | FAQ15 |
| 418736-2 | D9182 |
| 10114602 | A486G |
| 15650326-7 | F6151 |
| A05729 | K0967 |
| 30-296-623-88 | K0802 |
| 947575-1205 | 06481 |
| 25-113368-03 | 11530 |
Supersedes
This item replaces cancelled NIIN 004388741. An older drawing citing one of those numbers resolves here.