NSN 5305-00-285-3871 · NIIN 002853871 · FSC 5305
NO DASHES 5305002853871
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.544 AND INCHES MAXIMUM 0.562 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.094 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| MATT | MATERIAL | OVERALL STEEL |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 8 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| AASK | HEAD STYLE | |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY HEAD HOLE CONFIGURATION |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.250 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.226 AND INCHES MAXIMUM 0.243 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
Supersedes
This item replaces cancelled NIIN 008612082. An older drawing citing one of those numbers resolves here.