NSN 5305-00-866-2295 · NIIN 008662295 · FSC 5305
NO DASHES 5305008662295
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.188 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 321 OR STEEL COMP 347 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.172 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 2A |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.152 AND INCHES MAXIMUM 0.188 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 100000-02-2-1 | 19565 |
| 340-622-0062 | 1K426 |
| NAS662C2R3 | 80205 |
| FF-S-92 | 81348 |
| 5305PL0144488 | 9009H |
| 340-622-0062 | 99932 |
| 18577740-5 | F6151 |
| 18577740-5 | FAQ15 |
| 418736-1 | D9182 |
| 10114633 | A486G |
| B68154 | K0967 |
| 6079032 | 03640 |
| 4177160-001 | 05869 |
| 947575-1203 | 06481 |
Supersedes
This item replaces cancelled NIIN 001827030. An older drawing citing one of those numbers resolves here.